Commercial applications for electropolishing have been in use since the early 1950s. Most formal research on the process occurred at that time, motivated by the growth and sophistication in electroplating technology. Today there are about 500 industrial installations nationwide, and perhaps several dozen electropolishing job shops.
Electropolishing is often referred to as a “reverse plating” process. Electrochemical in nature, electropolishing uses a combination of rectified current and a blended chemical electrolyte bath to remove flaws from the surface of a metal part.
The typicalinstallation is deceptively similar to a plating line. A power source converts AC current to DC at low voltages. A tank typically fabricated from steel and rubber-lined is used to hold the chemical bath. A series of lead, copper or stainless steel cathode plates are lowered into the bath and installed to the negative (-) side of the power source. A part or group of parts are fixtured to a rack made of titanium, copper or bronze. That rack in turn is fixtured to the positive (+) side of the power source.
As the adjoining illustration depicts, the metal part to be electropolished is charged positive (anodic) and immersed into the chemical bath. When current is applied, the electrolyte acts as a conductor to allow metal ions to be removed from the part. While the ions are drawn towards the cathode, the electrolyte maintains the dissolved metals in solution. Gassing in the form of oxygen occurs at the metal surface, furthering the cleaning process.
Once the process is completed, the part is run through a series of cleaning and drying steps to remove clinging electrolyte. The resultant surface is clean and bright. In fact, the bright surface is the most identifiable trait, and the one that helped coin the name “electropolishing.”
While the process is best known for the bright polish left on a surface, there are some important, often overlooked benefits of this metal removal method. These benefits include deburring, size control, microfinish improvement and others. Deburring and other metal improvement benefits offer great promise to design and production engineers for cost savings and product improvement
Although the process is roughly 65 years old, substantial refinements have taken place. Many electrolytes have been developed to allow for electropolishing of a broad range of metals. These newer electrolytes, together with advanced parts handling techniques, have combined to improve production yields on a wide range of metal products.
In the area of metal finishing there is a lot of confusion about the difference of electropolishing and passivation. The major difference between the two operations is that electropolishing removes material from a part and passivation does not. Electropolishing removes the outer skin of metal along with the imbedded contaminants. Passivation only removes the free iron and surface contaminants. When the outer skin is dissolved, not only are the imbedded contaminants removed but the surface becomes smoother eliminating defects where bacteria can harbor and corrosion can initiate. The end result is the electropolished part is 30 times more corrosion resistant when subjected to salt spray testing. In addition, the surface is much more suited for food, medical and pharmaceutical.
Because so many industries, including medical, dental, pharmaceutical, aerospace and more, utilize electropolishing for their products, it has become a common finishing procedure for many small metal parts, including:
Our tightly controlled quality process and ISO 9001 and ISO 13485 certifications make us the preferred partner for many medical device manufacturers across the globe. From implantable devices to surgical instruments, electropolishing is a single-process treatment that results in biocompatible, safe and ultra clean parts.Learn More
We offer aerospace vendors and original equipment manufacturers our signature metal finishing services to increase fatigue-resistance for their metal parts, rendering them capable of withstanding the stress and corrosion that comes with long-term use. Surface abnormalities lead to part failure, but with electropolishing, parts become more reliable and long lasting.Learn More
Our strict adherence to industry standards ensures that pharmaceutical components are electropolished in accordance with ASTM B912 and ASME BPE specifications. These products are clean and smooth, corrosion resistant and contaminant free.Learn More
Corrosion resistance and microfinish improvement are essential for critical automotive parts, making electropolishing an increasingly beneficial option for automakers. Electropolishing both interior and exterior auto parts ensures they will resist premature failure and function at an optimal level.Learn More
Notable examples of appliance parts we electropolish are 400-series stainless steel alloys used in many consumer appliances. Our metal finishing services help increase corrosion resistance for these parts, and by removing the outermost layer of metal withelectropolishing the durability and longevityof these appliance components is increased.Learn More
We have a long history of working with the food and beverage industry. Electropolishing materials for this industry eliminates the buildup of bacterial biofilms, as well as keeping the equipment free of contaminants like Salmonella. When it comes to food and beverage processing equipment, safety and cleanliness are of the upmost importance and electropolishing delivers the level of sanitation required by a number of regulatory agencies.Learn More
From robotics to heavy mobile equipment, the uses of electropolishing in the hydraulics and pneumatics industry are many. By helping prevent premature part failure, electropolishing reduces the amount of downtime and increases the life cycle of these components. Proper surface finish and cleanliness is key in this industry, and electropolishing attains the finishour customers require.Learn More
Improving conductivity and performance is just one benefit electropolishing offers for electronics parts. The surface finish is improved by as much as 50 percent, removing imperfections from the material without removing a lot of material removal from the component.Learn More
The largest design and contract manufacturing show in North America, the Akron Design-2-Part Show is the most efficient place to meet hundreds of high-quality American suppliers of custom parts, stock parts, and manufacturing services.
John S. Knight Center | Akron, OH
The MPO Summit has provided the medtech industry with an opportunity for interactive networking and educational presentations for outsourcing for medical device manufacturing for over 15 years.
Grand America Hotel | Salt Lake City, UT